Human Bikunin DuoSet ELISA Summary

Product Summary

This DuoSet ELISA Development kit contains the basic components required for the development of sandwich ELISAs to measure natural and recombinant human Bikunin. The suggested diluent is suitable for the analysis of most cell culture supernate, serum, plasma, and urine samples. Diluents for complex matrices, such as serum, plasma, and urine, should be evaluated prior to use in this DuoSet.

Preparation and Storage

Background: Bikunin

Average the duplicate readings for each standard, control, and sample and subtract the average zero standard optical density (O.D.). Create a standard curve by reducing the data using computer software capable of generating a four parameter logistic (4-PL) curve-fit. As an alternative, construct a standard curve by plotting the mean absorbance for each standard on the y-axis against the concentration on the x-axis and draw a best fit curve through the points on the graph. The data may be linearized by plotting the log of the human Bikunin concentrations versus the log of the O.D. and the best fit line can be determined by regression analysis. This procedure will produce an adequate but less precise fit of the data. If samples have been diluted, the concentration read from the standard curve must be multiplied by the dilution factor.

Assay Procedure

Refer to the product datasheet for the complete assay procedure.

Bring all reagents and samples to room temperature before use. It is recommended that all samples, standards, and controls be assayed in duplicate.

1、Prepare all reagents, standard dilutions, and samples as directed in the product insert.

2、Remove excess microplate strips from the plate frame, return them to the foil pouch containing the desiccant pack, and reseal.

3、Add 50 μL of Assay Diluent to each well.

4、Add 50 μL of Standard, control, or sample to each well. Cover with a plate sealer, and incubate at room temperature for 2 hours.

5、Aspirate each well and wash, repeating the process 4 times for a total of 5 washes.

6、Add 100 μL of Conjugate to each well. Cover with a new plate sealer, and incubate at room temperature for 2 hours.

7、Aspirate and wash 5 times.

8、Add 100 μL Substrate Solution to each well.

9、Add 100 μL of Stop Solution to each well. Read at 450 nm within 30 minutes. Set wavelength correction to 540 nm or 570 nm.